HELLO FELLOW AGATEERS,
Here’s a group photo from the show at the Hotel Tucson. Andres Carillo (on the left below) brought me polished agates from the Coyamito ranch in Mexico and next to Andres is another friend, Joshua Ritter, who sold me some superb Fighting Blood agates from China. The rest of the group are also agate lovers.
In the next couple of days I’ll be opening a new offering in The Agate Shop with many new specimens from Mexico, China, Argentina and Morocco. One by one I’ll rejuvenate the rest of the stores in this order: jaspers, thundereggs, slabs and then cabochons. As I update each store I’ll be sending email announcements so please send your name and email address to email@example.com.
From left to right: Andres Carillo (Mexico), Joshua Ritter (Germany), Fady Kamer (The Netherlands), Ricardo Birnie (Argentina), Thom Lane (US), Hannes Holzemann (Austria), Dave Polson (US), Cedrine and Jerry Schaber (US)
I had the priveledge of giving a talk on the Baker Ranch thunderegg deposit and the genesis of thundereggs at the EXPO Symposium on July 7th, 2016.
The presenters of this symposium, The Gem Shop, videotaped the proceedings and with careful editing produced a wonderful set of four DVD’s. This handsome set contains all twelve presentations by many major figures in the agate world, a bargain for 99$! Find out all about it and order a copy for yourself at The Gem Shop.
In the early days of rockhounding in America it seemed like there was an endless abundance of wonderful agates and jaspers. The hobby of making cabochons grew so large that it was second only to woodworking as the most popular hobby in the US. During that time the great agate discoveries were exploited freely and many were quickly exhausted. Beautiful material was usually cut into slabs and the slabs were used to produce cabochons. It is still possible to find slabs that were set aside by collectors or were never cut into cabochons but it was uncommon to cut a rock in half and polish the face. Toward the end of that period I was making my living cutting cabochons but I was also a collector and a painter and when I saw a slab that was highly artistic I rarely cut it into cabs, it went into my slab collection.
Those who wish to collect the fine early materials should recognize that for the moment it is still possible to collect fine slabs and they offer many advantages to a collector. They are easy to store and display and they are reasonably priced given their rarity and beauty. Slabs and half nodule specimens can be combined in a display with the heavier specimens in the foreground and slabs mounted on stands above and behind them.
A few dealers at today’s rock shows still offer fine polished slabs of the rare early materials but it is not often that one sees a specimen of great beauty that is a saw cut rock with a polished face.
Precision polishing of a flat surface requires special equipment and knowledge and that may have further lessened the interest in flat lapping during the cabochon era.
Morrisonite is considered the King of Jaspers. I fell in love with it when I began cutting cabochons which are like miniature paintings. I felt that the images I could create with Morrisonite were the ones that really made it and I began my quest.
I met Darell Jakobitz, AKA Jake, in the late 1970’s. He sold at the 4th of July show in Madras, Oregon in the summer and once again at the PowWow in Quartzsite during the winter. On those occasions he had unbelievable slabs and many of the ones I bought went into my collection. An entire slab can equal the finest paintings in the world. In the 1980’s Gene Mueller became the principal miner and I went to Cedarburg to buy Morrisonite from him. With his permission I visited the mine in 1994 for a week with my son Miles and saw the mine for the first time. Several photos in Agates II are from Miles collection.
My first visit to the mine was in 1994
When Gene, my son Miles Lane and I arrived at the top rim of the Owyhee River Canyon Gene pointed out the road to the mining claims which goes across the hill and down the canyon wall beyond. From where we were the road dropped down very steeply to the visible area below but the next morning we went to the far side of the hill and down the side of the canyon, that’s when we really hung on for dear life. The dot in the center of the photo is the cabin on the right. It was built by the late Tom Caldwell, the first resident Morrisonite miner.
Gene and I began to talk about geology as the sun rose on the first day, a conversation that went on for years. The time I spent with Gene was a great learning experience. During our visit there Jake and Gene were working together at the area Gene eventually claimed under the name ‘Jake’s Place. As you can see in the photo of Gene tamping the nitro into a six foot drill hole this is indeed hard rock mining.
In 1995 I participating in the mining for a month
I volunteered to help and my reward was being able to buy freshly mined morrisonite at the end of the operations. I didn’t buy much because I was cutting cabs, I wish I had a time machine so I could go back for more!
Gene used an old loader to complete a treacherous road down to his new mining spot, the Christine Marie claim far below Jake’s Place. The loader was also used to remove the muck or waste after an area had been blasted and the jasper had been carefully mined out by hand.
The host rock at the CM Claim is broken up by nature which meant that it could be worked without explosives. We broke out the jasper by hand and Gene removed the muck with the old front end loader, shown above.
The host rock at the Christine Marie mine, above, has been shattered by forces in the earth long ago. The brown junky Morrisonite in the photo on the right was fairly abundant in certain areas and I include the photo because it shows how the jasper occurs in the rock. When it comes to gem jasper Gene said you get about a pound of Morrisonite per ton of rock.
The year before Miles and I had slept in a cabin up above so I just brought along a sleeping bag. When I asked Gene where I could sleep he said “anywhere you like”. Since there was no place for me in his cabin I tried to sleep on the ground but after about ten minuted I had rats in my face. The only way I could get off the ground was to sleep for the whole month in the five foot bed of the Ford Scout. It had front and rear positraction and was ideal for going up and down Gene’s road and I was always so exhausted that I slept fine. Gradually I began to fit in.
Here are some photos of Gene’s cabin which he built against a large boulder from mostly found materials at a cost of 37$.
Jake (right) was working above and came down for a visit. Inside Gene’s hut was the kitchen and across from it his sleeping loft and not much else.
After about a week working in the CM Mine Gene took me further down the road to where there was a large compressor. It was parked a hundred yards or so to the south of his cabin, the compressor was just around the corner in this view of the road from Gene’s cabin. The post sticking out above the road is one of the roof poles of the cabin.
From the compressor we headed up a scree slope and reached the Lower Cliff Dig up a ravine in the canyon wall to the left. The hose from the compressor was dragged up to the dig to run the drill from the compressor. To mine there you had to bring everything we needed for a day’s mining up the scree slope and every bit of Morrisonite was carried down in five gallon buckets. Tough work if you can get it.
In the photo on the left which was taken from about half way to the dig you can just make out the twelve foot long yellow compressor behind the long boulder on the road left of center. The photo on the right is from all the way up to the mine. You can see a red dot far down the scree slope, that’s Gene climbing up from the road.
Once you get to the mine the fun begins. On the left Gene stands on a ledge of solid rock which he is drilling in preparation to blast. You can tell the second photo is the next week because he’s changed his shirt. The blasting is a delicate process actually, too much explosive and the rock is blown apart and the jasper shattered.
The Lower Cliff Dig went directly into the base of a shear rock wall that went straight up above us for a hundred feet or so. The fact that I was willing to mine directly below it is evidence that I assumed that Gene knew what he was doing. Wherever he went I followed, simply putting my life in his hands and enjoying a great adventure. Thanks Gene, we made it!
The shear rock wall can be seen on the left. At the end of many days we had uncovered a vein of Morrisonite that was six feet long that yielded 600 pounds of high quality jasper. He set his camera on a rock and took this photo of us sitting at each end of the vein. He had mined it with such care that at this moment the vein was exposed but still unbroken.
1996 This year I brought a good tent
Jake joined us for this month of mining. He has been prospecting for and mining gem agates and jaspers his whole life and is also a very artistic cabochon cutter. On top of that he is one of the smartest and most considerate men I’ve known. In spite of having a hard youth and only a sixth grade education he is looked up to by everyone who knows him, Gene Mueller and Hans Gamma are close friends of his.
We had a village of 3, truly remote. Gene’s cabin is behind a huge boulder just beyond Jake’s white ten which you will see below. I pitched my tent far off the right, I guess I couldn’t stand the crowd.
Jake’s tent was the most livable of our three camps with a comfy cot and a stove. When I got up in the morning I’d wander in front of his tent and eventually he would call out “Hey Thom, want a cup of bean? The best coffee I ever had.
Here is the man himself in front of his camp that the early Native Americans would have appreciated. He spent more days living like this than under a house roof, almost always by himself, mining and prospecting.
When I arrived the Lower Cliff Dig it had just been blasted and I spent the month mining there. Eventually it was drilled and shot a second time by Jake and he spent some days up with me showing me the proper way to work it. I took these photos then.
On the left Jake had just found a piece of black Morrisonite with lovely orbs, he looks happy! In the center balanced on a rock face is Jake at work. I never saw him rush and I never saw him stumble and he spotted a lot more Morrisonite than I ever did. If nothing else that summer I was the most fit I’ve ever been.
During the time I mined at the Lower Cliff Dig I was mostly working alone except for the happy visits from Jake. Gene was mining the whole time for Christine Marie jasper and produced many great pieces of the highest quality.
In 2012 the Celebration of Agates in Minnesota gave me the chance to talk about plume agates and to show examples of some fine specimens from six different states in the western US.
To see fine plume agate slabs from my collection you should visit The Slab Shop.
To see the plume agate cabochons I have for sale please visit The Cabochon Shop. The Jewelry Shop is the place to shop for antique agate jewelry. There are rings and pendants set with Priday Plume cabochons.